IM-9
IM-9 Series
Bold design, powerful performance
Following on from the previous version’s matte finishing, the IM-9 now comes in sparkling misty silver and metal black. These effortlessly chic colours perfectly accentuate its distinctive profile and new hyper-reflective lining.
Then, once you step into the shower, you will be delighted by its surprisingly powerful performance, the result of Alpha’s renowned pump. The IM-9 makes every shower refreshing impressive.
Features
-
Flow Switch System
the heater only operates when there is sufficient water flow.
-
AC Booster pump
increases the water flow rate to give you a strong jet of water everytime.
-
Pump Activator (IM-9EP and IM-9i only)
will boost up up water flow in places with insufficient flow to activate the heater.
-
ELSD
Cuts off current flow if there is a risk of any current leakage.
-
Thermal Cut-out
Auto Reset prevents overheating at 55°C
-
Nylon Glass Fibre Internal Construction
A strong & durable non-conductive material for further insulation against electric shock.
-
Splash-proof IP25 Standard
protection against water seeping into the heater's internal mechanism.
-
Electronic Temperature Control
Shower temperature can be selected according to personal preference.
Technical Specification
Electrical Rating
|
Power
|
3.5kW - 5.5kW
|
Voltage
|
220-240Vac
|
Frequency
|
50/60Hz
|
Minimum Water Flow Rate
|
3 liters/minute
|
Minimum Pressure
|
20kPa (0.2 bar / 2.9 psi)
|
Maximum Pressure
|
0.3 MPa (3 bar / 43.5psi)
|
Heater Dimension
|
213 (W) X 406 (L) X 86mm (H)
|
Nett Weight
|
3.0kg
|
|
Pump
|
Motor Type
|
AC
|
Noise Level
|
< 70db
|
Rating
|
120W 240V - 50Hz
|
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice.
|
|